Pioneer BDP-320 - Manual (Page 34)

05
34
En
Chapter 5
Adjusting audio and video
Adjusting the video
The quality of the playback picture can be adjusted
acco rding to the TV you are using.
1 During playback, press VIDEO ADJUST to display
the Video Adjust screen.
The Video Adjust sc
reen can also be displayed by
selecting Video Adjust from the TOOLS menu.
2 Select a preset.
Select using
/ according to the TV being used.
• Pioneer PDP – Select this when connected to a
Pionee
r plasma TV.
• Pioneer LCD – Select this when connected to a
Pionee
r liquid crystal display TV.
• Pioneer Projector – Select this when connected to a
Pionee
r front projector.
• PDP – Select this when connected to a plasma TV of
anothe
r brand.
• LCD – Select this when connected to a liquid crystal
dis
play of another brand.
• Projector – Select this when connected to a front
projector of another brand.
• Professional – With this setting, video signal
processing is restrained. Select this when connected
to a
professional monitor.
• Memory1 to 3 – Picture quality settings with
adjusted
parameters can be stored in the memory.
Fo r a description of the parameters, see When
Memory1, 2 or 3 is selected below.
 When Memory1, 2 or 3 is selected
1 Select Adjustments.
Use
 to select Adjustments, then press ENTER.
A detailed settings sc reen appears.
2 Select the item to be adjusted.
Use
/ to select.
3 Adjust the picture quality.
When / are pressed, the adjustments can be made
viewing the picture. The detailed settings screen
reappears when ENTER is pressed.
• Prog.Motion – Adjust according to the type of image
(moving o
r still image). This is effective mainly when
out putting video materials as progressive images.
• Pure Cinema – This setting optimizes the operation of
the
progressive scanning circuit for playing film
mate rials. Normally set it to Auto1. If the picture
seems unnatu ral, switch this to Auto 2, On or Off
( page 35).
• YNR – Reduces noise in the luminance (Y) signal.
• CNR – Reduces noise in the chroma (C) signal.
• BNR – Reduces the block noise (block-shaped
disto
rtion generated upon MPEG compression).
• MNR – Reduces the mosquito noise (distortion along
the contou
rs of the picture generated upon MPEG
com pression).
• Detail – Adjusts the picture’s contours.
• White Level – Adjusts the level of the white portions.
• Black Level – Adjusts the level of the black portions.
• Black Setup – Select the black level as the setup level.
No
rmally select 7.5 IRE. If the black level is too bright
due to the combination with the connected TV, select
0 IRE.
• Gamma Correction – Adjusts how the dark portions
of the
picture look.
• Hue – Adjusts the balance between green and red.
• Chroma Level – Adjusts the density of the colors.
Note
• Prog.Motion and Pure Cinema have the effect only
fo
r pictures recorded in the interlaced scan format
(480i o r 1080i signals).
TOP MENU TOOLS
HOME
MENU RETURN
PLAY
PREV PAUSE STOP NEXT
RED GREEN YELLOW BLUE
VIDEO ADJUST
ENTER
Adjustments
Video Adjust
PDP
Prog. Motion
Pure Cinema
YNR
CNR
BNR
MNR
Detail
White Level
Video Adjust [ Memory1 ]
Motion Still
Auto1
Off Max
Off Max
Off Max
Off Max
Soft Fine
Min Max
Motion Still Prog. Motion
320_UXJCA_EN.book 34 ページ ２００９年２月１３日 金曜日 午後４時２６分