Panasonic TU-HDT105A - Manual (Page 14)

Operating Instruction Book
TU-HDT105A
5.5 Display Aspect Selection
s
During the installation, the digital receiver aspect
ratio is automatically set to widescreen 16:9 when
a HD format or SD component video is selected a
the output format. With a SD output format, the
aspect ratio is set to 4:3.
The aspect ratio can be changed, in SD, between
widescreen 16:9, centre cut for 4:3, or letterbox.
The Display Aspect can be changed using the
remote control by pressing the aspect button
to bring up the OSD. The OSD will have one
aspect selection highlighted. To change the
display aspect, push the button until you have the desired picture aspect. The
OSD will disappear after a few seconds. This function is similar to the VCR out
setting on page 19. However the “Display Aspect” setting affects the TV CVBS or
YPbPr output, while the “VCR out” setting affects only the VCR CVBS output.
6 Using the Main Menu
Your receiver comes with a directory of features or the Main OSD. The Main is your
gateway to customising many of the features offered by your receiver. To access the
Main OSD, press the
MENU button. The Main feature comprises the following
categories of services:
Program Guide provides access to:
Programs Schedule
Programs Categorisation
Booked Programs
TV/Radio Channels provides access to:
Program Favourite Channels
Selection of Favourite Channels
Channel locking
Video Menu provides access to:
Video Output Format
Teletext Contrast
Banner Display Time Out
VCR Screen Format
14