Premier Mounts GearBox Equipment Enclosure GB-PLEN1 User Manual
Page 7
Installation
Instructions
Page
7
GB-PLEN1
GB-PLEN1 Installation with PP-FCMA
Step 1. Loosen the four (4) mounting screws that are
located on the underside of the PP-FCMA. Do not
completely remove these screws.
Step 2. Slide the mounting rails (threaded holes facing
up) between the adapter plate and the PP-FCMA.
Step 3. Once the mounting rails have been positioned,
tighten the mounting screws with the
screwdriver.
Step 4. Align the mounting slots on the GB-PLEN1 with
the mounting holes on the mounting rails.
Step 5. Use four (4) M5 x 10mm screws to attach the
GB-PLEN1 to the mounting rails.
PP-FCMA
Mounting
Rails
Adapter Plate
Screwdriver
Mounting Screw
M5 x 10mm Screws
Mounting
Rails
The GB-PLEN1 is designed for use with either the PP-FCMA or PP-FCTA. After installing your
selected false-ceiling adapter, follow the instructions on the following pages to secure the GB-PLEN1.