Premier Mounts GearBox Equipment Enclosure GB-PLEN1 User Manual

Page 4

Text mode
Original mode

Page 4

Installation Instructions

GB-PLEN1 Installation with PP-FCTA

Step 1. Loosen the wing nuts (do not remove) on

the upper adapter plate.

GB-PLEN1

Step 2.

Slide the mounting rails

(threaded holes facing up) between the

upper adapter plate and the PP-FCTA.

Wing Nut

PP-FCTA
Plate

PP-FCTA

Mounting
Rails

Upper Adapter
Plate

Slide Guide

Wing nut

Step 3. Determine final placement of the upper
adapter

plate.

Step 4. Tighten the wing nuts.

All four wing nuts must be parallel with the
slide guide. If not, the Gear Box will not sit
correctly on the PP-FCTA (see illustration
arrow above).

The GB-PLEN1 is designed for use with either the PP-FCTA or PP-FCMA. After installing your
selected false-ceiling adapter, follow the instructions on the following pages to secure the GB-PLEN1.