Panasonic KX WP1050 - Manual (Page 139)

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help 139
Modifying the wireless information
1
Click [Network Connection] on the Top Menu.
2
Click [Modify] under the Wireless Information heading.
3
Configure the wireless connection basic settings, then click [Next>].
4
Configure the wireless connection security settings, then click [Save].
Setting Description
[Mode] L Select your wireless network mode from the pull-down menu.
L If you have both 802.11b and 802.11g wireless devices in
your network, select [802.11b/g].
L
If you have only 802.11b wireless devices, select [802.11b].
[Channel]
L
Select [Auto] or the desired channel from [1] to [11].
[Network Name
(SSID)] L Enter your wireless network name (SSID) (1 – 32
alphanumeric characters) in this data field.
[SSID Broadcast]
L
Enable or disable the broadcasting of your SSID.
L
If you select [Disable], only wireless devices that know the
SSID of the base unit can connect to the base unit.
L If you select [Enable], any wireless device can detect the
SSID of the base unit.
Setting Description
[Security Mode]
L
Select the desired security mode.
L No Encryption (Open), WEP, WPA-PSK and WPA2-PSK are
available for the wireless devices, including the handset.
Select the desired security mode for your wireless devices
connected to the base unit. Default is set to WEP.
WEP settings
[Network Key]
For WEP 64bit:
L
Enter the network key containing 5 alphanumeric characters
or 10 hexadecimal characters.
For WEP 128bit:
L
Enter the network key containing 13 alphanumeric
characters or 26 hexadecimal characters.
L
Press [View] to display the network key.
[Key Index]
L
Select [Key 1], [Key 2], [Key 3] or [Key 4] to be used if you
use WEP. The default is set to [Key 1].
WP1050.book Page 139 Wednesday, April 25, 2007 6:01 PM