21 system menu, System – Panasonic AJ-D455P User Manual
Page 21
21
SYSTEM menu
(continued)
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
18
CHROMA
0000
–127
.
.
.
.
LEVEL
.
.
0127
0
.
.
.
.
.
.
0255
128
21
SYS H
0000
–3
OFFSET
0001
–2
0002
–1
0003
0
0004
4
0005
5
0006
6
22
SYS SC/H
0000
REMOTE
0001
LOCAL
30
MENU
0000
OFF
LOCK
0001
ON
The underline on the setting item denotes the initial setting.
Video output signal adjustments
The SYSTEM menu item No. 03 (ENCODER SEL) and No. 22 (SYS SC/H) settings are used to make the video
output signal adjustments. The table below shows the control matrix for these adjustments.
Setting
Adjustment item
VIDEO LEVEL
SYSTEM menu item
SYSTEM menu item
SYSTEM menu item
CHROMA LEVEL
03: ENCODER SEL
22: SYS SC/H
00: SYS SC COAR.
SET UP
01: SYS SC FINE
HUE
OFF
LOCAL
Unit
Unit (SYSTEM menu)
REMOTE
ON
LOCAL
Unit
External encoder remote
REMOTE
External encoder remote
For setting the chroma level.
The maximum amount by which the level can be varied is from
–3 to +3 dB.
For adjusting the system phase offset: 4.48
µ
s steps
0: –13.4
µ
s
1: –8.96
µ
s
2: –4.48
µ
s
3: 0
4: +4.48
µ
s
5: +8.96
µ
s
6: +13.4
µ
s
setting operation is performed.
• When this menu item is used together with SYSTEM menu
item No. 02 (SYS H) setting, the adjustment is limited to a
range from –15 to +15
µ
s.
For setting whether the system phase is to be adjusted by the
unit or from the external encoder remote connector.
0: The system phase is adjusted from the external encoder
remote connector.
1: The system phase is adjusted by the unit.
SYSTEM menu item No. 3 (ENCODER SEL) setting.
• The range for the system phase adjustment using the
encoder remote connector is –3 to +3
µ
s. When this menu
item is used together with SYSTEM menu item No. 021
(SYS H OFFSET) setting, adjustment can be made from –15
to +15
µ
s.
This selects whether the system file lock mode is to be
engaged or released.
0: The lock is released (file data can be changed).
1: The lock is engaged (file data cannot be changed).