Panasonic AJ-D455P - Manual (Page 13)

13
!6 MONITOR OUT connector
The PCM audio CH1 and/or CH2 signals (or playback signals from the CUE track) are
output to this connector. PCM audio signals are output in the PLAY mode and in the
–0.43
Ч
(–0.5
Ч
) to +1
×
speed range; at all other times, the CUE signals are automatically
output.
• The speed in parentheses given for the speed range above applies when a DV or
DVCAM cassette is used.
• Either CH1, CH2 or mixed (CH1+CH2) PCM audio signals are output depending on the
position selected by the AUDIO MONITOR SELECT switch.
!7 ANALOG AUDIO OUT connectors
These are the analog audio CH1 and CH2 output connectors.
!8 SERIAL DIGITAL COMPONENT AUDIO VIDEO IN/OUT connectors
(The AJ-YA455P, an optional accessory, is required.)
These are the input and output connectors for the digital component audio and video
signals complying with the SMPTE259M-C or 272M-A standard.
!9
DIGITAL VIDEO INTERFACE (IEEE1394) IN/OUT connector
(The AJ-YAD455P, an optional accessory, is required.)
This is the IEEE1394 interface input/output connector.