Panasonic DMC-LC50GN User Manual

Page 48

background image

Recording pictures (advanced)

48

ª Taking Pictures using Night

Portrait Mode

Night portrait mode allows you to take
pictures against a nighttime landscape.
By using the flash and a slow shutter
speed, the picture will show the subject
and the background brighter than they
appear in real life.

Preparation
• Set the mode dial to [

]. (P8)

Shutter speed in Night portrait mode

Technique for Night portrait mode

• We recommend using a tripod since

the shutter speed becomes slow in a
dark setting (max. about 1 second).

• Keep the subject still for about

1 second after taking a picture.

• The subject should be positioned

within the available flash range
[50 cm – 4.8 m (Wide), 50 cm – 2.8 m
(Tele)].(When setting to [ISO400]/
[AUTO].)

• We recommend rotating the zoom

lever to Wide.

• The focus range is about 1 m – 3 m.

When taking picture of a landscape
at night

• When flash is set to Forced OFF

[

], you can capture the night

illumination scenery itself with slower
shutter speed. (Max: about 8 seconds)

• The focus range is about 3 m –

¶.

¬Suggestions/Tips ¬

• Flash setting is fixed to Slow sync./

Red-eye reduction [

].

• The shutter may be kept closed

(max. about 8 seconds) after taking a
picture with slow shutter speed, but it
is not a malfunction.

• When the flash is set to Forced OFF in

Night portrait mode and you record the
subject except the night illumination
scenery, the hue may change due to
the [AUTO] setting in white balance.

• You can change the white balance

setting. (P51)

• When you take pictures in dark places,

noises may become visible.
To avoid noises, we recommend
setting [PICT.ADJ.] to [NATURAL].
(P58)

• When you record pictures in dark

places, it may be difficult to focus on
the subject. We recommend recording
pictures in bright places with contrast
using the AF/AE lock (P28).

Flash

mode

Shutter speed

1 – 1/2000th

8 – 1/2000th

1600

19

LC80GN.book 48 ページ 2004年6月17日 木曜日 午前10時18分

This manual is related to the following products: