Panasonic DMR-ES20DEB - Manual (Page 31)

VIDEO Plus+ Remain 1:58 SP
12:09:37 18/ 11 THU
ENTER
RETURN Nr. 0 9
8 5 3 4 2
Enter PlusCode Number by using 0-9 keys.
TIMER
RECORDING
Remain 1:58 SP
12:09:37 18/ 11 THU
ENTER
RETURN CANCEL
Date Start Stop Mode
SP ON
Name
No. 0 9
Press ENTER to store the programme.
VPS
PDC
Nr Name Datum Mode Stop Start
TIMER
RECORDING
STTL
PDC
No. Name Date Mode Stop Disc
space Start
New Timer Programme
01 BBC2 18/11 THU 16:00 ON 15:00 SP
ENTER
RETURN CANCEL
Remain 1:58 SP
12:09:37 18/11 THU
2 BBC2 18/11 THU 15:00 16:00
34
RAM -R ( ) -RW V +R
OK
28
VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.
TIMER-controlled recordings
You can programme up to 16 programmes per month in advance.
Insert a disc.
VIDEO Plus+ is not supported for digital channels.
Programming recordings with VIDEO Plus+
By entering a VIDEO Plus+ number, the TIMER-controlled recording is easy to set.
The appropriate codes can be found in newspapers and TV guides.
! Press VIDEO Plus+.
! Enter the VIDEO Plus+ number using the numeric buttons.
Use to delete a number.
! Confirm the VIDEO Plus+ number with ENTER.
In the TIMER RECORDING screen, check the start and end time and the PDC
signal.
If [ ---] is displayed under Name, use to select the desired programme position.
! Use , to select the recording mode. (XP, SP, LP, EP, FR)
If you selected PDC [ON], recording mode FR is not possible.
! If you want to enter the programme name, use to select [Programme Name]
and confirm with ENTER.
! Once you have performed all changes, save the programme with ENTER.
! To continue programming, select [New Timer Programme].
! Press TIMER to switch the unit to TIMER standby mode.
The symbol lights up in the unit display.
! To cancel or pause the recording, press TIMER again.
VIDEO Plus+
[Chan. Name] BBC2
[Prog. Name] Sports News
BBC2
Sports News
PDC
VIDEO Plus+ Codes for Satellite Receivers
This DVD Recorder is not designed to control (switch on or change channel) your satellite
receiver, however, it can be taught to recognise VIDEO Plus+ Codes for Satellite stations.
The Satellite Receiver must be switched on and the correct station selected.
Some receivers have their own timer facility for this purpose.
Please refer to your Satellite Receiver instructions for use of such timer facilities.
For your DVD Recorder to recognise the VIDEO Plus+ Codes for each satellite station, you
must teach your DVD Recorder which channel or AV input to record from for the first time.
Otherwise when setting a VIDEO Plus+ recording, the [- -] symbol will appear in the
channel position indicating that the DVD Recorder does not know which channel position
to set.
Once you have set the channel/AV input the DVD Recorder will remember it whenever you
use a VIDEO Plus+ Code for the station again.
! Press the VIDEO Plus+ button.
! Enter a VIDEO Plus+ Code from a Satellite TV Guide for a satellite channel,
e.g. Sky 1 using the Numeric buttons. Press to correct any mistakes.
! Press the ENTER button. [ - - ] will appear instead of a channel number/AV input.
! Press the CH button to select the channel or AV input that is to be used for recording
from the satellite channel.
! Press the ENTER button to memorise the setting. The DVD Recorder will now
automatically set the programme position or AV input correctly when a VIDEO Plus+
recording is set for this satellite station in the future.
! Press to select the programme that you have just set. Now press the
button to delete it from the timer recording list. It is no
longer needed.
CANCEL/RESET
! Repeat the steps above until you have set and deleted dummy timer recordings for
each of the satellite stations that you will make VIDEO Plus+ recordings from.
! Press RETURN when you have finished.
TIMER recording from Sat with VIDEO Plus+
VIDEO Plus+ Remain 1:58 SP
12:09:37 18/ 11 THU
ENTER
RETURN No. 0 9
8 5 3 4 2
Enter PlusCode Number by using 0-9 keys.
ENTER
RETURN Nr. 0 9
TIMER
RECORDING
Remain 1:58 SP
12:09:37 18/ 11 THU
ENTER
RETURN CANCEL
Date Start Stop Mode PDC
SP -----
Name
No. 0 9
----- --/-- ---- 15:00 15:00
Invalid Entry
ENTER
RETURN Nr. 0 9
TIMER
RECORDING
Remain 1:58 SP
12:09:37 18/ 11 THU
ENTER
RETURN CANCEL
Date Start Stop Mode PDC
SP ON
Name
No. 0 9
AV2 26/10 TUE 15:00 16:00
Press ENTER to store the programme.
31
VIDEO Plus+
----
AV2
Programme Name
Programme Name
Programme Name