Panasonic NV-FJ760 - Manual (Page 38)

38
Audio Dubbing on a Panasonic Hi-Fi VCR
General
≥
The VHS format allows audio dubbing only on the normal (mono) audio track, as the Hi-Fi audio tracks cannot be
re-recorded without erasing the video signal.
A. Audio Dubbing and then Playing Back the Audio-Dubbed Mono Sound Alone
1 Press the INPUT SELECT button 3 to select the AV input terminal to which the audio dubbing source unit is connected.
2 Press the Play button I to search for the tape position at which the audio dubbing is to start.
3 Press the AUDIO button ? repeatedly until the “ss” indication appears.
≥ The normal audio track is now selected.
4 Press the Pause/Still button e at this position.
5 Press the A.DUB button _ to switch the VCR over to the audio dubbing mode.
6 Press the Pause/Still button e to start audio dubbing.
7 After audio dubbing has been completed, rewind the tape, play it back and make sure that the normal audio track is
selected (see step 3 above).
8 Check if the audio dubbing was performed to your satisfaction.
B. Audio Dubbing and then Playing Back the Audio-Dubbed Mono Sound and Original
Hi-Fi Sound Together (Hi-Fi Mix Function)
1 Press the INPUT SELECT button 3 to select the AV input terminal to which the audio dubbing source unit is connected.
2 Press the Play button I to search for the tape position at which the audio dubbing is to start.
3 Press the AUDIO button ? repeatedly until the “L R” indication appears.
≥ The Hi-Fi audio tracks are now selected.
4 Press the Pause/Still button e at this position.
5 Press the A.DUB button _ to switch the VCR over to the audio dubbing mode.
6 Press the Pause/Still button e to start audio dubbing.
7 After audio dubbing has been completed, rewind the tape, play it back and set “Audio mode” to “MIX”. (For details, refer
to page 54.)
8 Check if the audio dubbing was performed to your satisfaction. The original sound and the new sound are heard
simultaneously (mixed together).
C. Externally Mixing the Sound from the Hi-Fi Tracks with the New Sound for Audio
Dubbing and then Playing It Back (To produce audio-dubbed tapes for playback on mono VCRs)
1 Press the INPUT SELECT button 3 to select the AV input terminal to which the audio dubbing source unit is connected.
2 Press the Play button I to search for the tape position at which the audio dubbing is to start.
3 Press the AUDIO button ? repeatedly until the “L R” indication appears.
4 Press the Pause/Still button e at this position.
5 Press the A.DUB button _ to switch the VCR over to the audio dubbing mode.
≥ Input both the original signals of the Hi-Fi tracks (from the AV1, AV2 or the Audio Output sockets) and the new sound
into a mixing console (optional), and then input the mixed sound back into the VCR (via the AV1, AV2 or AV3 socket)
for audio dubbing.
6 Press the Pause/Still button e to start audio dubbing.
7 After audio dubbing has been completed, rewind the tape, play it back and press the AUDIO button ? repeatedly until
the “ss” indication appears.
≥
The normal audio track is now selected.
8 Check if the audio dubbing was performed to your satisfaction. The original sound and the new sound are heard
simultaneously (mixed together).