Linksys SLM224G4S - Manual (Page 18)

12
Installation Chapter 4
24/48-Port 10/100 + 4-Port Gigabit Resilient Clustering Smart Switch with 2 Combo SFPs
HTTP
HTTP Server Enable or disable the Switch’s HTTP server
function.
HTTP Server port Set the TCP port that HTTP packets are
sent and received from.
Network Configuration
The Network Configuration screen offers a choice of two
tests, Ping and TraceRoute.
Network Configuration
Ping The Ping screen displays the IP address of the
location you want to contact.
Ping
Select Edit to change the IP address, and select Execute
to begin the ping test.
After the ping test is complete, the Ping screen displays
the IP address, status, and statistics of the ping test.
TraceRoute The TraceRoute screen displays the IP address
of the address whose route you want to trace.
TraceRoute
Select Edit to change the IP address, and select Execute
to begin the traceroute test.
After the traceroute test is complete, the TraceRoute
screen displays the IP address, status, and statistics of the
traceroute test.
File Management
The File Management screen allows you to upload or
download files, such as the startup configuration, boot, or
image file, using a TFTP server.
File Management
Source File Specify the location of the file to transfer.
Select one of the following:
TFTP If the file is located on a TFTP server.
Image If the file is a software code file.
Startup-config If the file is a configuration file.
Destination File Specify where the file is to be transferred.
Select one of the following:
TFTP If the file is to be uploaded to a TFTP server.
Image If the file is to be downloaded as a software
code file.
Startup-config If the file is a configuration file
Boot If the file is a boot file.
File Name Enter the name of the file to be uploaded or
downloaded.
IP Address Enter the IP address of the TFTP server that
will transfer the file.
•
•
•
•
•
•
•