Lopi Direct Vent Freestanding Stove - Manual (Page 45)

Optional Equipment
(for qualified installers only)
4 5
Travis Industries 1 0 0 - 0 1 1 8 7 _ 0 0 0 4 0 7 0 2 1 9
Accent Light Operation
OFF
Turn the dial all the
way counter-clockwise
until it clicks off.
HIGH
The high position
is all the way
clockwise.
LOW
Turn the dial 180°
clockwise until the light
begins to glow.
N O T E : The accent light responds best when turned to high, then turned down to the desired light level.
Bulb Replacement
N O T E : Do not touch the bulb – oil or other residue left on the bulb may lead to premature bulb failure.
Use a cloth or paper towel to handle the bulb.
The accent light must be replaced with 35 Watt 120 Volt T4 Halogen Bulbs (G6.35 Base) – available at
most hardware stores. To replace the bulb, simply remove it from the socket and insert the new bulb (pin
orientation does not matter).