Program bank 3 (p3) – Lexicon PCM 80 User Manual
Page 112
Lexicon
4-16
PCM 80 User Guide
4.7
LvlSweeper
ADJUST:
Color
0–24
This preset is driven by level. Any input that exceeds the input threshold will cause a little
burst of resonators that quickly swirl through the stereo field. ADJUST controls the pitch
range of the resonators.
4.8
Sweeper
ADJUST:
Pitch
0–24
This preset is a resonant arpeggiator in which a tempo-driven LFO controls the resonator
pitches. ADJUST controls the pitch range of the arpeggio effect.
4.9
MIDISustain
ADJUST:
Bright
0–5
This preset requires MIDI note input or it will not pass audio. Resonators are assigned as
the notes are played (when playing chords, it's best to spread them a little). Footswitch
2 works like a piano damper pedal. When the audio source is the same as the MIDI source,
the effect is a little like playing a piano while holding down the pedal. When the audio
source is different, well ... ADJUST controls the brightness of the resonators.
0.0
Small+Stage
ADJUST:
Stage Lvl
0–50
This preset combines a smooth, small reverberant space with several stage reflections.
Use ADJUST to set the stage reflection level.
0.1
Small Room
ADJUST:
Liveness
0–60
Use ADJUST to quickly change the ambient characteristics of this typically tight sounding
room. Great for ADR work.
0.2
Living Room
ADJUST:
Decay
0–60
Another ADR preset,medium spaced but with a short Rt. ADJUST quickly changes if not
perfect for your application.
0.3
Brick Kick
ADJUST:
Liveness
0–100
Kicks *ss on kick drums or the entire submix. ADJUST increases the liveness of the
chamber.
0.4
Large Room
ADJUST:
Decay
0–60
A perfectly smooth listening room with medium diffusion. Very natural sounding on any
sound source. ADJUST lengthens or shortens the reverb decay.
0.5
SnareChamber
ADJUST:
Liveness
0–60
Like Brick Kick, ADJUST increases the liveness of the space. A classic from the PCM 70.
0.6
Tiled Room
ADJUST:
Decay
0–60
A future classic... ADJUST controls reverb decay.
0.7
Rich Chamber
ADJUST:
Decay
0–60
Smooth and full sounding. ADJUST varies reverb decay.
0.8
Vox Chamber
ADJUST:
Liveness
0–60
Combines recirculating echoes which fall away quickly once signal is absent. Increasing
ADJUST lengthens the reverb decay, which will mask the reflection echoes. For vocals.
0.9
Locker Room
ADJUST:
Depth
0–127
Just like in high school. ADJUST creates a deeper, more reverberant sound.
1.0
Wide Chamber
ADJUST:
Decay
0–60
Big and wide sounding with a preset short Mid Rt. ADJUST will change that if necessary.
Use on synth pads or vocals.
Resonant Chord Effects
(P2 4.1 – P2 4.9) cont'd.
Program Bank 3 (P3)
Reverb Effects
(P3 0.0 – P3 2.8)