Lennox Hearth BT8010 - Manual (Page 9)

12
GB
ES
13
Jabra BT8010 Bluetooth headset
GB
ES
Note: If you start a music session from your music player,
the headset will automatically change into Music mode.
Note:* If you accept a call in Music mode the headset
automatically changes to Phone mode. When you
terminate the call, the headset will return to Music
mode. Depending on the music device, the music will
automatically resume.
7. Working with two connected
devices
Your Jabra BT8010 lets you connect to two devices for
phone and music* features. Please note that the BT8010
will have different rights in terms of controlling these
two devices.
Primary device Secondary devic
Phone features Answer call Answer call
End call End call
Reject call 1 Reject call 1
Voice dialing 1 Call waiting 1
Last number redialing 1 Put call on hold 1
Call waiting 1 Volume control
Put call on hold 1
Volume control
Music features* Play/Pause music 1 Headset
Stop music 1 automatically plays
Skip track forward 1 music, if initiated from
Volume control the secondary device
Volume control
1 Phone/device dependent
Note: The last paired device is automatically set as
your primary device. If you would like to change your
secondary device to your primary device, please press
and hold the mode button. You will receive an audio
notification indicating that the primary device has shifted.
Note: The primary and secondary device will be listed
in the BT8010 display, with the primary device listed at
the top.
8. Basic usage of your Jabra
BT8010 headset
1. Locking the headset
• Press and hold the menu button to lock/unlock
the headset controls
(If the display is off, please tap the menu button to
wake it up first)
2. Wake up display
• Tap the menu button (if locked, please press and
hold the menu button to unlock the headset
before further use)
3. Show caller ID
To protect your privacy, Caller ID is set to “On demand”
by default. In this mode Caller ID will not be indicated,
unless you specifically request it during an incoming
call.
• During an incoming call, tap the menu button (If
you have set Quiet mode to “On”, please tap the
menu button to wake up the display first)
* Requires stereo accessory