Lennox Hearth BT8010 - Manual (Page 10)

14
GB
ES
15
Jabra BT8010 Bluetooth headset
GB
ES
4. Volume control
• Your Jabra BT8010 headset features an automatic
volume control that adjusts the volume
depending on the ambient noise level. For
manual adjustment, turn the jog wheel clockwise
to increase the volume or counter clockwise to
decrease the volume (right side wearing).
Note: If the headset is set for left side wearing, the volume
control is inverted (e.g. the volume is increased with a
counter clockwise movement).
9. Using your Jabra BT8010
headset for phone calls
The operation of the basic call features is very similar to
your mobile phone.
1. To answer a call
• You answer a call directly on the headset with a
tap on the Answer/End button. A simple tap on
the headset’s Answer/End button will capture and
transfer the call to the headset
2. To end or reject a call
• A tap on the Answer/End button terminates the
active call
• You can also reject an incoming call directly from
the headset. Press the Answer/End button and the
call will be rejected. Depending on your mobile
phone settings, the caller will either be forwarded
to your voice mail or hear a busy signal
3. To make a call
• If you make a call from the mobile phone, the call
will (subject to phone settings) automatically be
transferred to the headset. If your phone does not
support this function, tap the answer/end button
on the BT8010 to receive the call on the headset
• Voice dialing is activated with a tap on the
Answer/End button. For further information about
using this feature, please consult your phone’s
user manual. You will get the best results if you
record the voice-dialing tag through your headset
• Activate last number redial with a press on the
Answer/End button on the headset
4. Call waiting and placing a call on hold
• Press once on the Answer/End button to put
active call on hold and answer the waiting call
• Tap on the Answer/End button to end active
conversation
• Swap between the two calls with a press on the
Answer/End button
10. Using your Jabra BT8010
headset for stereo music*
Before playing music please plug in the stereo unit
for a full stereo experience. Please refer to section “5.
Wearing your Jabra BT8010” for information on how
to wear the headset.
Please ensure that the headset is in music mode (music
mode icon indicated on display).
* Requires stereo accessory