Kohler ODEON VITREOUS CHINA P/S-TRAP TOILET K-8741T User Manual
Page 3
-3-
3. SELECT P-TRAP OR S-TRAP
to installation
your toilet according to the drain and shut-off valve's
Roughing-in dimensions.
2. ASSEMBLE TANK BOLTS&WASHERS
Slip bolt heads into mounting plate on bottom of tank. Place
large foam washer on base of flush valve.
Place tank on bowl and attach with nuts and washers from
under bowl.
See Fig. #2a.
See Fig.#2b.
NOTE: Do not use white cement or high lime content
cements to install this toilet. The expansion of cement due to
a rise in temperature may make the toilet crack or cause
damage. Kohler is not responsible for any damage caused by
installation with the use of cement.
2.
2a
2b
£
£
3.
£
Fig.#2a
2a
Fig.#3a
3a
Fig.#3b
3b
S-trap installation
P-trap installation
Fig.#2b
2b
100
120
1
8
0
255/305
50
255/305
100
120
50
180
1037406-T01-A
This manual is related to the following products:
- ODEON VITREOUS CHINA P/S-TRAP TOILET K-8709T ODEON VITREOUS CHINA P/S-TRAP TOILET K-8766T ODEON VITREOUS CHINA P/S-TRAP TOILET K-11184T ODEON VITREOUS CHINA P/S-TRAP TOILET K-8710T ODEON VITREOUS CHINA P/S-TRAP TOILET K-8753T ODEON VITREOUS CHINA P/S-TRAP TOILET K-8711T ODEON VITREOUS CHINA P/S-TRAP TOILET K-8767T