Kenwood DDX8024BT - Manual (Page 75)

English 75
Speaker Location setup
Display the Speaker Location Setup screen 1
Set the speaker locations 2
[Front Speaker] Sets the location of the front
speaker.
"Door", "On Dash", "Under Dash"
[Rear Speaker] Sets the location of the rear
speaker.
"Door", "Rear Deck"
"2nd Row", "3rd Row" (Minivan, Passenger van)
Car Type Adjust
You can manually set the sound output timing of
each channel.
Display the Car Type Adjust screen 1
Select a speaker you wish to adjust 2
2 2 2
1 1 1
3 3 3
4 4 4
1 Center speaker
2 Front speaker
3 Rear speaker
4 Subwoofer
Set a delay time 3
Make fine adjustment of the delay time of the
speaker output specified at Type> to have a more suitable environment for
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the distance difference in
accordance with the farthest speaker.
50cm
80cm
150cm
+70cm
+0cm
+100cm