Kenwood DDX8024BT - Manual (Page 69)

English 69
Select the Bluetooth unit to register 4
1 1 1
1 Displays the searched Bluetooth unit.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth unit.
Enter PIN code 5
1 1 1
1 Enters a code number using the keypad.
[Enter] Confirms the entered PIN code. Enter
the PIN code specified for the Bluetooth unit
you are registering.
This button will not be active until at least four
PIN code digits have been entered.
[Cancel] Cancels registration of PIN code.
[Clear] Clears the code number.
⁄
You can also register from the Bluetooth unit side. For •
the PIN code necessary for registration, see Bluetooth Unit PIN Code> (page 70).
If the error message appears even though the PIN code is
•
correct, try .
Registering Special Bluetooth Unit
Registers Special Bluetooth unit, that resulted
in error by normal registration method, by
selecting from the listed models.
Display the Special Device List screen 1
Select a model name 2
Displays the Bluetooth unit name that can be
registered.
Confirm whether to register 3
⁄
Only models in Bluetooth unit name list can be •
registered.
Go through the procedure of 4
Bluetooth Unit> and complete the
registration (pairing)