Sony CDP-NW10 - Manual (Page 20)

20 US
Chapter 3
Playing Discs
(CDP-NW10 only)
This chapter describes how to play a
CD disc or how to play audio in
various modes using the CDP-NW10.
Playing a CD Disc
1 Press X/1 (POWER).
The Unit turns on.
2
Press OPEN/CLOSE to open the door, then place a
disc on the spindle firmly.
3
Press OPEN/CLOSE.
The door closes.
4 Press the “CD” SELECT on the Home Menu.
The track list appears on the front panel display.
When the Unit has been connected to the Internet via a
computer, the track titles are downloaded from the
Gracenote CDDB
R server, and the track titles appear
on the front panel display. You can select and play
back desired tracks from these lists. When the Unit is
not connected to a computer or your computer is not
connected to the Internet, only “TRACK1,”
“TRACK2,” etc., appear on the front panel display.
5
Press N.
When CD information is downloaded from Gracenote
CDDB
R , you can also press the “TRACK” SELECT.
To stop playing a disc
Press x.
Additional operations
To Press
Mute the sound MUTING. To cancel muting,
press it again or press VOLUME +
to adjust the sound volume.
Select a track number Numeric buttons (0-9).
When the track number
is between 1 and 9:
press the corresponding numeric
button, then press N.
When the track number is
10 or higher:
press the corresponding numeric
buttons in sequence.
e.g.: Playback of the 14th track
Press 1
t 4 in order.
Note
If there is no disc in the Unit or a disc that cannot be read by the
Unit, “NO DISC” appears on the front panel display.
Playback side
facing the Unit