Specifications – Sennheiser Quadpack qp 3041 User Manual

Page 31

Specifications

Overall unit

Receiver slots for up to four EK 3041 receivers:

at the front, fastened with four M2 screws respectively,
without additional adapter

RF connection:

via special angled plug

Antenna inputs:

2 x BNC at the rear

Antenna output
(for supplying two Quadpacks with the signals of two
antennas):

1 x BNC at the rear

Operating switch for overall unit (incl. receivers):

rocker switch at the rear

Operation indicator for overall unit:

red LED at the front

Operation indicator for receiver modules:

4 x LED at the front

Connector for external DC power supply:

4-pin XLR, male

Audio outputs:

3-pin XLR, male

Monitor output:

1/4

(6.35 mm) jack socket

Selection of monitor receiver:

via 4 “push-push” keys

Indication of selected monitor receiver:

color of operation indicator for receiver module chan-
ges from red to green

Selector switch for mic / line level :

slide switch at the rear

Level control for mic / line level :

potentiometer at the rear

Wideband input module can be exchanged
for a selective input module:

2 input modules at the rear

Supply voltage range:

10.5

–

18 V

, 12 V

DC nominal

Current consumption with 4 receivers, peak deviation,
headphone output at nominal load:

490 mA/12 V

Supply voltage for antenna boosters:

2 x 10.5

–

18 V, 50 mA nominal

Fuse: 1

Temperature range:

–

10 ... +55° C

Dimensions:

approx. 214 x 230 x 85 mm (1/2 19

, 2 U)

Weight incl. receivers:

3,520 g

Wideband input module

Frequency range:

–

900 MHz