Sony SPP-A945 - Manual (Page 37)

Additional Information
Additional Information 37 EN
Additional Information
1
Remove the hang-up tab and
replace it upside down.
Mounting the base phone on a wall
Telephone line cord
AC power adaptor cord
Wall bracket
Wall plate
2
Attach the AC power adaptor
cord and the telephone line cord
to the wall bracket.
3
Hook the wall bracket to the
wall plate, and plug the
telephone line cord into the
telephone outlet.
If the wall plate is not available, use
the two screws provided to mount
the bracket.
If the wall bracket is unstable, tear
off the two protuberances at the
horizontal arrows (b/B) and insert
them in the slots at the lower
corners of the wall bracket, marked
by the vertical arrows (v) .
4
Insert the upper tabs first, then
press down the base phone so
that the lower tabs on the
bracket go into the base phone.
Raise the antenna vertically.
Hang-up tab