Silvercrest KH6500-06/08-V1 - Manual (Page 19)

- 17 -
PASSWORD
Here you can change the preset password
(888888) and enter your own password. Only the
numbers 0-9 can be used.
• To change the password select the entry
CHANGE.
• Enter in the line OLD PASSWORD the valid
password with the number buttons. The tab chan-
ges to the next line NEW PASSWORD.
• Enter the new password with the number buttons.
The tab changes to the next line CONFIRM PW.
• Enter the new password with the number buttons.
The tab changes to the OK field.
• Press the button OK/ENTER . The password has now
been changed.
Note:
In the event that you forget your password you can
use the factory default password (888888).
X X X X OLD PASSWORD
NEW PASSWORD
CONFIRM PW
OK
* * PASSWORD SETUP PAGE * * * * PASSWORD SETUP PAGE * * * * PASSWORD SETUP PAGE * *
CHANGE PASSWORD CHANGE PASSWORD CHANGE PASSWORD
CHANGE CHANGE CHANGE
PASSWORD MODE PASSWORD MODE PASSWORD MODE
PASSWORD
PASSWORD PASSWORD
ON ON ON
8.6 EXIT SETUP
• Select the last menu in the toolbar and press the
button OK/ENTER to exit the setup menu.
9. Sound functions
9.1 To control the Volume
Press the button VOL+ o to increase the volume.
Press the button VOL- a to decrease the volume.
9.2 Mute
Press the MUTE button to switch off the sound.
To switch the sound on again press the MUTE button
once more or press one of the buttons VOL+ or VOL- .
10. Playback of DVD, SVCD,
VCD and CD discs
10.1 Inserting the disc
• Open the disc tray of the DVD player by
pressing the OPEN/CLOSE button.
"OPEN" will now appear in the display.
• Place a DVD/VCD/S-VCD with the inscribed/
labelled side facing up in the disc tray.
• Close the flap of the disc tray.
"LOAD" will appear in the display.
• The contents of the inserted DVD/VCD/S-VCD
will now be loaded; this may take a few se-
conds.
• Playback of the inserted DVD/VCD/S-VCD starts
automatically.
EXIT SETUP EXIT SETUP EXIT SETUP
IB_KH6500_AR23388_LB6 01.08.2008 11:47 Uhr Seite 17