Menu functions, 5 setting the viewing position – Silvercrest KH6500-06/08-V1 User Manual

Page 14

- 12 -

6.5 Setting the viewing position

Your portable DVD player is equipped with a
pivoting swivelling TFT display screen.
In the event that you find the image quality of a
DVD to be insufficient, slightly turn the device to op-
timize the viewing angle.
The TFT display screen will turn 180° and fold
down in this position thus allowing the display to
operate when the device is closed up.

7. Use

• Carry out the required connections as described

in chapter 5 and provide a power supply.

• Lift up the TFT display screen.

Switching the DVD player on and off

• Set the

POWER

switch to the "ON" position

to switch the DVD player on.

The TFT display screen switches on and the back-
ground image appears.
If no disc is inserted into the disc tray the notice
"READING" will appear briefly followed by the
prompt "NO DISC".
• To switch the DVD player off set the

POWER

switch

to the position "OFF".

Buttons on the device and the remote control

Most of the functions described in this manual can
be set using the buttons on the device or also the
buttons on the remote control. When both buttons
are possible for operation then both numbers will
be specified after the button designation (for exam-
ple

DVD/USB/CARD

button.

Display settings

• Press the

FUNCTION

button to access the display

settings. The settings can be accessed at any
time.

• Select with the navigation buttons

one of

the inputs Brightness (Bri), Contrast (Con) and
Saturation (Sat).

• With the navigation buttons

change the va-

lue.

• To exit the settings press the

FUNCTION

button

again.

• To reset the settings select the input Reset and

press the button

OK/ENTER

8. Menu functions

Navigating in the menu

Press the

SETUP

button to access the setup menu.

The main menu appears GENERAL SETUP
PAGE.

• With the navigation buttons

and the

button

OK/ENTER

you can carry out all settings in

the menu.

2. With the navigation buttons

you select a

menu by moving the yellow highlighting under
the corresponding menu symbol.

3. With the navigation buttons

you select an

input in a menu by moving the yellow bar over
an input.

4. With the navigation button

you change an

input in the sub menu and with the navigation
button

you move back to the previous menu

level.

5. To confirm a selection press the button

OK/ENTER

• All navigation possibilities in a current menu are

displayed at the lower edge of the menu.

• To exit the setup menu either press the button

SETUP

or select the last symbol "EXIT SETUP" and

press the button

OK/ENTER

TV DISPLAY

TV DISPLAY
ANGLE MARK

ANGLE MARK

ANGLE MARK
OSD LANGUAGE

OSD LANGUAGE

OSD LANGUAGE
CLOSED CAPTIONS

CLOSED CAPTIONS

CLOSED CAPTIONS
SCREEN SAVER

SCREEN SAVER

SCREEN SAVER
LAST MEMORY

LAST MEMORY

WIDE

WIDE
OFF

OFF

OFF
ENG

ENG

ENG
OFF

OFF

OFF
ON

ON
OFF

OFF

* * GENERAL SETUP PAGE * *

GOTO GENERAL SETUP PAGE

IB_KH6500_AR23388_LB6 01.08.2008 11:47 Uhr Seite 12