Standard Horizon CP150C - Manual (Page 32)

Page 34 GPS Chart 150C
Figure 3.8.2a - Moving Waypoint (II)
3.8.3 Inserting a Waypoint into a Route
Every time you place the cursor on the segment connecting two existing Waypoints
of a Route the following functions are available: insert Waypoint, report, delete Route.
Place cursor on Route leg:
Figure 3.8.3 - Placing Waypoint between two existing ones (I)
Press “ENTER”. Select INSERT and press “ENTER”. The line between the two
Waypoints is turned into a dotted line: move the cursor to the new position. The line
will "rubber-band", drawing a dotted line between the last Waypoint and the cursor,
and another dotted line between the cursor and the next Waypoint:
Figure 3.8.3a - Placing Waypoint between two existing ones (II)