Standard Horizon CP150C - Manual (Page 15)

GPS Chart 150C Page 17
GPS Antenna connector
Power and I/O connector
.
2.6 TURNING POWER ON AND OFF
Press and hold “PWR” for 1 second to turn on. The chart plotter emits one rapid beep
and the Start-Up pages are displayed.
Figure 2.6 - Start-Up pages
To turn off, press and hold “PWR” for 3 seconds, a countdown timer will appear on
the screen. If you release “PWR” before the countdown timer reaches zero, the chart
plotter will remain on.
2.7 CHANGING SHIP ICONS
The ships icon can be changed to the following:
Figure 2.7 - Ships icons
To change the icons press “MENU” + GENERAL SETUP + “ENTER” + SHIP ICON
+ “ENTER”.
2.8 ADJUSTING CURSOR SPEED
The cursor speed may be changed from moving slowly, medium or fast. The cursor
speed can be controlled on the Chart page and also within the menus. To change the
cursor speed:
Press “MENU” + GENERAL SETUP + “ENTER” + CURSOR SPEED + “ENTER”.