Samsung SCX-6322DN - Manual (Page 21)

2 .6
Auto Continue
This is the option to set the machine to continue printing or not, in case
the paper size you have set and the paper within the tray mismatches.
1 Press Menu until System Setup appears on the bottom line of the
display and press OK.
2 Press OK when Machine Setup appears.
3 Press the Scroll buttons until Auto Continue appears and press
OK
.
4 Press the Scroll buttons until the binding option you want appears.
• On: automatically prints after set time passes, when the paper size
mismatches the tray paper size.
• Off: waits until you press Start on the control panel, when the
paper size mismatches the tray paper size.
5 Press OK to save your selection.
6 Press Stop/Clear to return to Standby mode.