Sony XDCAM HD PDW-HD1500 User Manual

Page 121

121

Maintenance Menu

Chap

r 7

Men

M38: F-KEY
CONFIG

For details, refer to the Maintenance Manual.

M380: HOME2

Assign a function menu item to page HOME2 of the function menu as a user
setting.

M381: PAGE8 ASSIGN

Assign a setup menu item to page P8 of the function menu as a user setting.

M382: PAGE8 NAME

Specify the name of a setup menu item assigned with M381: PAGE8 ASSIGN.

M38F: NV-RAM
CONTROL

Save the settings of M380 to M382.

M3B: VANC RX
PARAMETER

M3B0: VANC RX
PACKET

For setting HDSDI VANC data input parameters

Notes

• In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the

corresponding line in the second field (for example, if line 9 is selected, line 527
is also selected for VANC packet reception).

• Menu item M3B0 enables recording of one VANC packet when the selected line

contains any packets whose DID/SDID matches the value set with this menu
item.

• Up to four packets are recorded per each line regardless of the DID and SDID

for the VANC set with menu item M3B1 or M3B2.Menu items M3B1 and MSB2
enable recording of up to four VANC packets in the selected line, respectively,
regardless of the DID/SDID value.

• It is not possible to set the same line with menu items M3B0, M3B1, and M3B2.

If the same line is specified, priority is given in the order of M3B0, M3B1, and
M3B2 (for example, if the same line is specified with M3B0 and M3B1, the
setting with M3B1 is ignored).

• When VANC data is output to HDSDI playback signals, the number of the

output VANC line is the same as that of the input VANC line.

• When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or

essence mark output takes priority. To disable UMID or essence mark output,
set setup menu item 651 or 657 to “off”.

Sub-item

LINE

Selects the lines for the VANC to be received.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)

DID

Specification of the DID of the VANC to receive
00h-FFh

SDID

Specification of the SDID of the VANC to receive
00h-FFh

M3B1: LINE1 SEL

Selects the lines to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)

M3B2: LINE2 SEL

Selects the lines to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)

M3C: POWER SAVE CONTROL

Specification of whether to enable the power saving function
OFF, ON

M3D: DATE/TIME PRESET

Specification of the date and time

M3E: USB MEMORY UTIL

For installation of software upgrade

For details, refer to the Maintenance Manual.

M3F: FACTORY SETUP

For details, refer to the Maintenance Manual.

M3: OTHERS: Other setting items

Item

Setting