Sony XDCAM HD PDW-HD1500 - Manual (Page 117)

117
Setup Menu
Chap
te
r 7
Men
u
s
935 DETAIL GAIN (DC) Adjust the down-converter image enhancer, the sharpness of edge
enhancement.
0 to 7FH
936 LIMITER (DC) Adjust the down-converter image enhancer, the maximum detail level
added to emphasize the original signal.
0 to 20H to 3FH
937 CRISP THRESHOLD (DC) Adjust the down-converter image enhancer, the threshold amplitude at
which low amplitude signals are not emphasized.
0 to FH
938 LEVEL DEPEND THRESHOLD
(DC) Adjust the down-converter image enhancer. Set the luminance range for
edge enhancement.
0 to 8 to FH
939 H DETAIL FREQUENCY (DC) Adjust the down-converter image enhancer. Set the central frequency for
edge enhancement.
2.6MHz, 3.4MHz, 3.9MHz, 4.6MHz
940 H/V RATIO (DC) Adjust the down-converter image enhancer. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3 to 7
942 V FILTER SELECT Set the vertical interpolation filter coefficient for down-converter output (in
1080 mode only).
1 to 3
943 CROSS COLOR CRISP Set the cross color crisp level for down-converter output.
0 to 4 to FH
950 UP CONVERTER MODE a) Select the up-converter mode.
crop: Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
951
H CROP POSITION (UC)
a) Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the up converter output when menu item 950 is set to “crop”.
–120 to 0 to 120
952
LETTER BOX POSITION (UC)
a) When menu item 950 is set to “l-box”, adjust the vertical location of the
position where the picture is cut out for up converter output in letter box
mode.
–120 to 0 to 120
953
UP CONVERTER PROCESS
a) Select the source picture to use in converting SD to HD.
field: Use field pictures.
adapt: Frame or field is selected automatically.
954
DETAIL GAIN (UC)
a) Adjust the up-converter image enhancer, the sharpness of edge
enhancement.
0 to 40H to 7FH
955
LIMITER (UC)
a) Adjust the up-converter image enhancer, the maximum detail level added
to emphasize the original signal.
0 to 20H to 3FH
956
CRISP THRESHOLD (UC)
a) Adjust the up-converter image enhancer, the threshold amplitude at
which low amplitude signals are not emphasized.
0 to 8 to FH
957 LEVEL DEPEND THRESHOLD
(UC)
a)
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
0 to 8 to FH
958 H DETAIL FREQUENCY (UC) a) Adjust the up converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
Menu items in the 900s, relating to digital process
Item number Item name Settings