Specifications, System, Receivers – Sennheiser EW100 G2 User Manual
Page 42
42
Specifications
System
Receivers
RF characteristics
Modulation
wideband FM
Frequency ranges
518–554, 626–662, 740–776, 786–822, 830–866 MHz
Transmission/receiving frequencies
8 channel banks with 4 factory-preset channels each
1 channel bank with 4 freely selectable channels
(1440 frequencies, tunable in steps of 25 kHz)
Switching bandwidth
36 MHz
Nominal/peak deviation
± 24 kHz/± 48 kHz
Frequency stability
≤ ± 15 ppm
AF characteristics
Noise reduction system
Sennheiser
HDX
AF frequency response
40–18,000 Hz
S/N ratio (at 1 mV and peak deviation)
≥
110 dB(A)
THD (at nominal deviation and 1 kHz)
≤ 0.9 %
General data
Temperature range
–10 °C to +55 °C
Dimensions of carrying case [mm]
380 x 370 x 70
Weight of carrying case with EM 100 G2
approx. 3100 g
Weight of carrying case with EK 100 G2
approx. 2160 g
RF characteristics
EM 100 G2
EK 100 G2
Receiver principle
true diversity
non diversity
Sensitivity (with
HDX
,
peak deviation)
<2.5 μV at 52 dBA
rms
S/N ratio
<2.5 μV at 52 dBA
rms
S/N ratio
Adjacent channel rejection
≥ 65 dB
≥ 65 dB
Intermodulation attenuation
≥ 65 dB
≥ 65 dB
Blocking
≥ 70 dB
≥ 70 dB
Squelch
4 steps:
OFF
LO: 5 dBμV
MID: 15 dBμV
HI: 25 dBμV
4 steps:
OFF
LO: 5 dBμV
MID: 15 dBμV
HI: 25 dBμV
Pilot tone squelch
can be switched off
Antenna inputs
2 BNC sockets
–
AF characteristics
AF output voltage
(at peak deviation 1 kHz
AF
)
¼
’’ (6.3 mm) jack socket
(unbalanced): +18
dB
u
XLR socket (balanced):
+12 dB
u
3.5 mm jack socket:
unbalanced: +10 dB
u
Overall device
Power supply
10.5–16 V DC,
nominal voltage 12 V DC
2 AA size batteries, 1.5 V
Power consumption
approx. 200 mA
approx. 130 mA
Power consumption with
switched-off receiver
–
≤ 250 μA
Dimensions [mm]
212 x 145 x 38
82 x 64 x 24
Weight
approx. 1100 g
approx. 158 g (incl. batteries)