Sterling Plumbing Bypass Shower Doors 6065 - Manual (Page 2)

Tools and Materials
Before You Begin
CAUTION: Risk of injury or product damage. Do not attempt to cut tempered glass.
IMPORTANT! This door is designed to accommodate walls that are less than 3/8 ″ (1 cm) out of plumb.
Verify the area the door will be attached to is within 3/8 ″ (1 cm) or better of plumb. The door may not
function properly if the wall is more than 3/8 ″ (1 cm) out of plumb.
Before beginning the installation, measure the dimensions of the opening and confirm the model of
door you are installing is the correct size.
The bath/shower should be installed at this time, including finished wall materials.
Safety Glasses
Level
Caulk Gun
File
Knife Pliers Miter Box
Pencil or Felt
Tip Marker
Tape
Measure Masking
Tape Silicone
Sealant
Center
Punch
Assorted
Screwdrivers Miter Saw or Hack Saw with
32 Teeth Per Inch Blade
Drill and
5/16" bit
Claw
Hammer
Plus:
• Drop Cloth
• Tile or Masonry Bit
(if installing onto tile walls)
1035946-2-C 2 Sterling