Woodstock W1828 - Manual (Page 24)

Model W1828 (For Machines Mfg. Since 4/11)
-22-
M
A
INTE
N
A
N
CE
MAINTENANCE
Lubrication
Since all bearings are sealed and permanently lubricated,
simply leave them alone until they need to be replaced.
Do not lubricate them.
Tables can be kept rust-free with regular applications
of products like SLIPIT ® . For long term storage you may
want to consider products like Boeshield T-9™.
Table & Base
Frequently vacuum the wood chips and sawdust from the
sander, then blow-off any remaining dust with compressed
air. This is especially important for the motor. Sawdust
build-up around the motor is a sure way to decrease its
life span.
Cleaning
Regular periodic maintenance on your machine will
ensure its optimum performance. Make a habit of
inspecting your machine each time you use it.
Check for the following conditions and repair or
replace when necessary:
• Loose mounting bolts.
• Worn switch.
• Worn or damaged cords and plugs.
• Worn or damaged sandpaper disc.
• Any other condition that could hamper the safe
operation of this machine.
General
MAKE SURE that your machine is
unplugged during all maintenance
procedures! If this warning is ignored,
serious personal injury may occur.