Sending a fax by normal dialing – Sharp UX-340LM User Manual
Page 44

Sending a Fax by Normal Dialing
42
•
Set the resolution and/or contrast if 
desired.
READY TO SEND
or
SPEAKER
1
Load the document(s).
Sending a Fax by Normal Dialing
With Normal Dialing, you pick up the handset (or press the SPEAKER key) and dial 
by pressing the number keys.
♦
If a person answers, you can talk with them through the handset before sending 
the fax. (If you pressed the SPEAKER key, you must pick up the handset to talk.)
♦
Normal Dialing allows you to listen to the line and make sure the other fax 
machine is responding.
RESOLUTION
2
Pick up the handset or press the
SPEAKER key. Listen for the dial 
tone.
3
Dial the number of the receiving
machine by pressing the number 
keys.
4
Wait for the connection. Depending
on the setting of the receiving 
machine, you will either hear a 
facsimile reception tone or the 
other person will answer.
Beep
•
If the other party answers, ask 
them to press their Start key (if you 
pressed the SPEAKER key, pick up 
the handset to speak with them). 
This causes the receiving machine 
to issue a reception tone.
2
5
8
GHI
JKL
MNO
TUV
WXYZ
PQRS
ABC
DEF
1
4
7
3
6
9
all_ux340lm.book Page 42 Tuesday, November 28, 2000 3:09 PM
