Sony READER DAILY EDITION PRS-950 - Manual (Page 124)

Changing Settings
124
Table of Contents Index
[Device Lock]
Locks the Reader by setting a pass code.
 Tap [On] to set a pass code.
Input a 4-digit number by tapping the numeric key
pad.
 Tap [OK] to lock the Reader.
 To unlock, input the pass code and tap [OK]. Then
tap [Off] to unlock the Reader, and tap [OK].
Notes
 [0000] is the factory setting.
 You are recommended to make a note of your password
and keep it in a safe place separate from the Reader.
 If you forget your password, contact your Sony Customer
Support (  3 ); however, note that in unlocking your
device, all content on it will be erased.
 When the [Device Lock] setting is activated, the Reader will
not be recognized by your computer, please set to [Off]
before connecting.
[Standby Screen]
Sets the standby screen during the sleep mode. [Off]
displays nothing in the sleep mode.
 [Show picture]: Set [On] to show the selected
pictures on the standby screen. For details on setting
the pictures, see “To set as a standby screen” (  114 ).
 [Show message]: Set [On] to show messages on the
standby screen.