Woodstock SHOP FOX W1730 - Manual (Page 27)

-25-
MAINTENANCE
W1730 Oscillating Edge Sander
Maintenance Notes
Maintenance Schedule
• Every 2 Hours of Running Time: Clean and lubricate table top, miter slot and fence.
• Every 3 Hours of Running Time: Check belt tracking. Check sanding belt condition.
• Every 6-8 Hours of Running Time: Replace belt.
• Every 2,000 hours: Replace the rubber V-Belt (recommended). Check the
eccentric and spindle connector. Lubricate all oil ports and
grease fittings, rack and pinion gear, and check gear box.
DATE MAINTENANCE PERFORMED