Sony HT-SL40 - Manual (Page 40)

40 GB
HT-SL55 4-247-583-12(1) GB
Specifications
Amplifier section
POWER OUTPUT
Models of area code CEL,CEK
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
25 W + 25 W 2)
Reference Power Output 2)
(8 ohms 1 kHz, THD 10 %)
FRONT 1) : 35 W/ch
CENTER 1) : 35 W
SURR 1) : 35 W/ch
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
20 W + 20 W 2)
Reference Power Output 2)
(8 ohms 1 kHz, THD 10 %)
FRONT 1) : 30 W/ch
CENTER 1) : 30 W
SURR 1) : 30 W/ch
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code Power requirements
SP, CEL, CEK 230 V AC, 50 Hz
Frequency response
TV/SAT, DVD, VIDEO: 10 Hz – 50 kHz
+0.5/–3 dB (with sound
field and tone by passed)
Inputs (Analog)
TV/SAT, DVD, VIDEO: Sensitivity: 250 mV
Impedance: 50 kilohms
S/N
3) : 96 dB
(A, 250 mV 4) )
3) INPUT SHORT (with sound field and tone by
passed).
4) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
DVD, TV/SAT (Optical) Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Outputs
SUB WOOFER
Voltage: 2 V
Impedance: 1 kilohms
Tone
Gain levels:
±6 dB, 1 dB step
Video section
Inputs
Video:
1 Vp-p, 75 ohms
Outputs
Video:
1 Vp-p, 75 ohms
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity
Mono:
18.3 dBf, 2.2 µV/75 ohms
Stereo: 38.3 dBf, 22.5 µV/75
ohms
Usable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono:
76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
GB10ADD_HT-SL55.p65 28/4/2003, 11:58 AM 40