Sony HT-SL40 - Manual (Page 31)

31 GB
HT-SL55 4-247-583-12(1) GB
Other Operations
x Audio input mode for TV/SAT function
(TV-XXXX)
Lets you select the audio input mode for
TV/SAT function.
• “AUTO” gives priority to digital signals, when
there are both digital and analog connections. If
there are no digital signals, analog is selected.
• “OPT” specifies the digital audio signals input
to the DIGITAL TV/SAT OPT IN jacks.
• “ANLG” specifies the analog audio signals
input to the TV/SAT IN (L/R) jacks.
x Decode priority (DEC. XXXX)
Sets the appropriate decoding for incoming
digital signals.
• PCM priority mode (DEC. PCM)
Use to enjoy playback from audio CD
(PCM) and DVD. When used with media
other than CD or DVD, you may experience
noise. If this happens, switch to AUTO
mode.
• AUTO mode (DEC. AUTO)
Use to enjoy playback from audio CD
(PCM), DVD, DTS-CD and DTS-LD
sources. However, with audio CDs, you may
not be able to listen the very first moments
of each track.
Normally, use as-is with the initial settings
above.
GB08OTR_HT-SL55.p65 28/4/2003, 11:58 AM 31