Figure 3-32 802.1x port configuration -72 – SMC Networks TIGERSWITCH SMC6752AL2 User Manual
Page 120
C
ONFIGURING
THE
S
WITCH
3-72
•
Quiet Period – Sets the time that a switch port waits after the Max
Request Count has been exceeded before attempting to acquire a new
client. (Range: 1-65535 seconds; Default: 60)
•
Re-authen Period – Sets the time period after which a connected
client must be re-authenticated. (Range: 1-65535 seconds;
Default: 3600)
•
Tx Period – Sets the time period during an authentication session that
the switch waits before re-transmitting an EAP packet.
(Range: 1-65535; Default: 30)
•
Authorized –
- Yes – Connected client is authorized.
- No – Connected client is not authorized.
- Blank – Displays nothing when dot1x is disabled on a port.
•
Supplicant – Indicates the MAC address of a connected client.
•
Trunk – Indicates if the port is configured as a trunk port.
Web – Click Security, 802.1X, Port Configuration. Modify the parameters
required, and click Apply.
Figure 3-32 802.1X Port Configuration