Sony SPP-M937 - Manual (Page 37)

Additional Information
Additional Information 37 US
Mounting the base phone on a wall
1
Raise the hang-up tab.
2
Plug the telephone line cord(s)
to the L1/L1+L2 and/or L2 jack
and the AC power adaptor to
the DC IN 9V jack.
3
Attach the wall bracket to the
center of the base phone.
Align the f marks of the wall
bracket with those of the base
phone.
4
Plug the telephone line cord(s)
to the telephone outlet(s), and
hook the base phone to the wall
plate.
5
Plug the AC power adaptor to
an AC outlet. Then raise the
antenna so that it points
towards the ceiling.
Tip
To remove the wall bracket, press the lower tabs.
Wall plate
AC outlet AC power adaptor
Telephone
line cord
2
4,5
Hang-up tab
1
Additional Information
Telephone
line cord
AC power
adaptor cord
3
Wall
bracket