Sony SPP-M937 - Manual (Page 18)

Basics 18 US
Making calls (continued)
Tips
• You can talk on the base phone by pressing (LINE 1) or (LINE 2) on the base
phone after you have dialed on the handset (speakerphone).
• The LINE 1 or LINE 2 button on the handset double flashes in succession,
when the base phone or another phone is used.
• If you pick up another phone connected to the same phone line, the hold will
be automatically released and you will be able to resume conversation on
that phone.
If the handset battery becomes weak during a call
You will hear a beep and the INTERCOM/BATT LOW lamp on the
handset flashes.
The call will be disconnected soon. Replace the handset on the base
phone to charge.
Making calls through the speakerphone
Press (LINE 1) or (LINE 2) on the base
phone.
The corresponding line button lights up.
Dial the phone number.
To adjust the speaker volume, press
(VOLUME)(+) or (--).
To mute your voice, press (MUTING) to
disable the microphone. The MUTING
lamp lights up. Press (MUTING) again to
cancel.
When you are done talking, press (OFF).
Tip
The LINE 1 or LINE 2 button on the base phone double flashes in succession,
when the handset is used.
(LINE 2)
(VOLUME)
(HOLD)
(LINE 1) (OFF)
(REDIAL/PAUSE)
(MUTING)
Notes
• If you hear ringer tones during the conversation, another call is coming in on
the other line (see page 22).
• Do not press (CHANNEL) when you are far from the base phone. The call may
be disconnected.
• If you hear an short error beep when you press (CHANNEL), move closer to
the base phone.