John Deere HR-G1700i - Manual (Page 32)

32 Operator’s Manual
Service
MAINTENANCE SCHEDULE
Maintenance, replacement or repair of the emission control devices and
systems must be performed by an authorized John Deere Service Center
or Dealer.
DAILY INSPECTION:
Before running the generator, check the following service items:
• Leakage of gasoline and engine oil.
• AC receptacle and DC terminal for damage.
• Excessive vibration, noise.
• Loose or broken bolts, nuts or shields.
• Clean air element.
PERIODIC MAINTENANCE:
Periodic maintenance is vital to safe and efficient operation of your
generator.
Check the Periodic Maintenance Table for periodic maintenance
intervals.
NOTE: REPLACEMENT, REPAIR AND ADJUSTMENT OF THESE
COMPONENTS MUST BE PERFORMED BY AN AUTHORIZED
JOHN DEERE SERVICE CENTER OR DEALER.
The emission control system consists of the following parts:
• Carburetor and internal parts
• Cold start enrichment system, if applicable
• Intake manifold, if applicable
• Air cleaner element
• Spark plug
• Magneto or electronic ignition system
• Spark advance / retard system, if applicable
• Exhaust manifold, if applicable
• Hoses, belts, connectors, and assemblies