IOGear GCS1732 - Manual (Page 21)

19
Operation
To Invoke Hotkey Mode (MAC Keyboard):
1. Press and hold Clear key for two seconds
2. Press and hold Minus key [ – ] key for one second
3. Release Minus key [ – ] and
within one second also release Clear key
The KVM will now enter Hotkey mode; indicated by blinking of the Caps Locks LED. On some MAC
keyboards, this LED is on the Caps Lock key itself.
Mac keyboard
Clear
Minus
NOTE: If using the Num Lock and Minus key to invoke Hotkey mode is not optimal, refer to the next page for
instructions on changing the hotkey invocation keys to Ctrl and F12.
If the KVM did not enter Hotkey mode, repeat the above procedure keeping in mind
that this entire procedure must be done within five seconds.