Specifications, Dtr-7, Dtr-6 – Integra DTR-7 User Manual
Page 60
60
Specifications
DTR-7
AMPLIFIER SECTION
Continuous Average Power output (FTC)
All channels:
105 watts per channel min. RMS at 8
ohms, 2 channels driven from 20 Hz
to 20 kHz with no more than 0.08%
total harmonic distortion.
135 watts min. RMS at 6 ohms, 2
channels driven from 1 kHz with no
more than 0.1% total harmonic dis-
tortion.
Total Harmonic Distortion:
0.08% at rated power (Front)
IM Distortion:
0.08% at rated power (Front)
Damping Factor:
60 at 8 ohms (Front)
Input Sensitivity and Impedance
PHONO:
2.5 mV, 50 kohms
LINE (CD, TAPE, DVD,
VIDEO 1, 2, 3,4):
200 mV, 50 kohms
MULTICHANNEL INPUT
(FRONT L/R, SURROUND L/R, CENTER):
200 mV, 50 kohms
(SUBWOOFER):
36 mV, 50 kohms
COAXIAL 1, 2 (DIGITAL):
0.5 Vp-p, 75 ohms
Output Level and Impedance
Rec out (TAPE, VIDEO 1):
200 mV, 2.2 kohms
Pre out:
1 V, 470 ohms
Phono Overload:
110 mV RMS at 1 kHz, 0.5% T.H.D.
Frequency Response:
20 Hz to 100 kHz, +1/-3 dB(LINE INPUT)
RIAA Deviation:
20 Hz to 20 kHz,
±
0.8 dB
Tone Control
Bass:
±
10 dB at 100 Hz
Treble:
±
10 dB at 10 kHz
Signal-to-Noise Ratio
Phono:
80 dB (IHF A, 5 mV input)
CD/Tape:
100 dB (IHF A)
VIDEO SECTION
Input sensitivity/Impedance
(DVD, VIDEO 1, 2, 3,4)
VIDEO (Composite):
1 Vp-p, 75 ohms
Output Level/Impedance
(VIDEO 1, 2, MONITOR)
VIDEO (Composite):
1 Vp-p, 75 ohms
DTR-6
AMPLIFIER SECTION
Continuous Average Power output (FTC)
All channels:
85 watts per channel min. RMS at 8
ohms, 2 channels driven from 20 Hz
to 20 kHz with no more than 0.08%
total harmonic distortion.
110 watts min. RMS at 6 ohms, 2
channels driven from 1 kHz with no
more than 0.1% total harmonic dis-
tortion.
Total Harmonic Distortion:
0.08% at rated power (Front)
IM Distortion:
0.08% at rated power (Front)
Damping Factor:
60 at 8 ohms (Front)
Input Sensitivity and Impedance
PHONO:
2.5 mV, 50 kohms
LINE (CD, TAPE, DVD,
VIDEO 1, 2, 3,4):
200 mV, 50 kohms
MULTICHANNEL INPUT
(FRONT L/R, SURROUND L/R, CENTER):
200 mV, 50 kohms
(SUBWOOFER):
36 mV, 50 kohms
COAXIAL 1, 2 (DIGITAL):
0.5 Vp-p, 75 ohms
Output Level and Impedance
Rec out (TAPE, VIDEO 1):
200 mV, 2.2 kohms
Pre out:
1 V, 470 ohms
Phono Overload:
110 mV RMS at 1 kHz, 0.5% T.H.D.
Frequency Response:
20 Hz to 100 kHz, +1/-3 dB(LINE INPUT)
RIAA Deviation:
20 Hz to 20 kHz,
±
0.8 dB
Tone Control
Bass:
±
10 dB at 100 Hz
Treble:
±
10 dB at 10 kHz
Signal-to-Noise Ratio
Phono:
80 dB (IHF A, 5 mV input)
CD/Tape:
100 dB (IHF A)
VIDEO SECTION
Input sensitivity/Impedance
(DVD, VIDEO 1, 2, 3,4)
VIDEO (Composite):
1 Vp-p, 75 ohms
Output Level/Impedance
(VIDEO 1, 2, MONITOR)
VIDEO (Composite):
1 Vp-p, 75 ohms