4 press or to select ip mode, then press enter, 5 press or to select an ip mode. you can select, 6 press to go to the previous menu – Insignia NS-BRDVD4-CA User Manual
Page 47: Using the network test, 1 press enter. the settings menu opens, 2 press or to select network, then press enter, St (see “using the network test, Ip settings

47
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
3
Press or to select Wired, then press ENTER. The IP Settings screen
opens.
4
Press or to select IP Mode, then press ENTER.
5
Press or to select an IP mode. You can select:
•
Dynamic—Uses DHCP to automatically obtain an IP address.
•
Manual—Lets you manually configure network settings, such
as IP address, subnet mask, and gateway settings.
•
Off—Disables the network interface.
6
Press to go to the previous menu.
Using the network test
Test the connectivity of your player
’
s configuration by pinging an IP
address.
To test the network:
1
Press ENTER. The Settings menu opens.
2
Press or to select Network, then press ENTER.
IP Settings
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Link Down
00:22:84:04:96:f1
Dynamic
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Apply
Cancel
NS-BRDVD4-BRDVD4-CA_10-0919_MAN_V5.fm Page 47 Friday, August 13, 2010 11:33 AM