Inner Space Systems CONCEPT 4000 - Manual (Page 8)

8
Concept 4000 / Insight - Integrated Security Management
Enterprise Level Access Control
Concept 4000 caters for a complete range of installations;
single door systems through to global multi-site applications.
• Fully intelligent four door access modules provide
full offline operation
• Cost effective two door access modules with offline
cache functionality
• Fully featured lift control with button feedback,
destination reporting and high level interface options
• Soft, hard, or timed anti-pass-back and door
interlock - functions across any combination
of doors in the system
• Dual user and card + PIN functionality
• Monitoring of door forced, DOTL (door open too
long), tongue sense and entry / exit buttons
• Free access options via time zones and area
status, etc.
• Area On/Off control from a door reader without
PIN codes or terminals
• Extended door access times for disabled users
• User counting facilities
• Site code processing of a large range of Wiegand,
magnetic stripe and many other formats
• IR-Secure 40 format offering added security and
extended range of site codes
• Dual-format readers supporting IR-Secure 40, HID
and other formats
• “Illegal card” and “too many PIN attempts”
monitoring
Unrivalled Security Power
Each Concept 4000 controller offers powerful intruder alarm
functionality:
• Advanced multi-tenancy across 250 areas
• Support for special duress, panic, hold-up and
suspicion alarm functions
• Pulse counting and other customised input
processing
• Support for a wide range of wireless devices
• Look-ahead reporting feature prioritises new alarms
to over-ride multi-break reporting
• Walk test zone inputs
• Automatic daylight saving adjustment
• Telephone line, power supply, battery and
fuse monitoring
Third Party Connectivity
The Concept 4000 hardware platform works seamlessly at
hardware level with other powerful automation technologies
such as:
• AMX Control and Automation Systems
• Clipsal C-Bus Energy Management
• Crestron Control and Automation systems
• Dynalite Intelligent Lighting
• HPM iCONTROL home automation
• Otis and Kone lift control
A single Concept 4000 panel provides up to
50,000 users, 250 modules, 250 doors
and 250 areas
IR-TransTech Solutions
IR-TransTech solutions set a new benchmark in third party
connectivity. These solutions empower system designers
and integrators with an almost utopian wish list of high-
level integration possibilities. Using this technology
Concept 4000 systems can now interact effectively with
all major building automation and HVAC communication
protocols:
Bacnet, Bacnet/IP, Lonworks, EIB and
Modbus to name just a few. Proprietary lift control,
Lighting and energy management protocols such as ABB,
Ademco, Honeywell, Siemens and Andover can also now
be transmitted to and from your Concept 4000 system
using these new transparent devices.
Over 150 different protocols are supported.
IR-TransTech modules are factory configurable devices,
which sit between the RS-232 port of the Concept 4000
control module and the target system. These devices
translate commands and replies between the two systems
creating a seamless dialogue that requires no further
ongoing technical input.
Standing quite apart from the comprehensive range of
high-level standard integration options already available
at the Concept 4000 hardware level; these new factory
configurable solutions constitute an exciting addition to the
powerful armoury of existing Inner Range solutions.
Orders for these customisable solutions can only be placed
via direct consultation with the factory.