ITT 29-100-1 ST - Manual (Page 9)

8
Press the Mute button again to
restore the sound. The symbol
will disappear.
Pressing Volume up buttons
will also restore the sound.
But pressing the Volume down
button will increase the volume
without restoring.
PP
Personal preference. Press the
PP button to revert to the
default settings for the TV.
(See TV setup).
Swap
Tuning the television
There are two ways of tuning your television:
Manual, where you control the tuning process
or
Autoprogram where the television does it all
automatically.
Your TV will sort all the channels with the
ATS. Sorting will be performed in the
following order:
Please Note
If the TV is set to a channel with no signal the
TV will return to standby in 5 minutes.
The last minute remaining is displayed on
the screen.
Automatic tuning (Autoprogram)
There are two ways to access the SETUP
menu:
Press the blue Setup button.
or
Press the Menu button and use the
Program down button to select
SETUP. Press the OK button to
enter the SETUP menu.
a- Selected country’s channels with teletext
and channel names.
b- Selected country’s channels with teletext
and without channel names.
c- Selected country’s channels without
teletext.
d- Foreign channels with teletext and channel
names.
AV
Your TV has 2 ( 3. scart opt. ) scarts
so every time you press your AV
button, your input will change as
follows:
1 AV1 when using SCART socket 1
(RGB support) (Option).
2 AV2 when using SCART socket 2.
3 AV3 when using SCART socket 3
(RGB support) (Optional).
4 AV3-S for S-Video equipment to scart 3
(S-VHS/Scart adapter is needed).
5 AV4 when using the RCA sockets
of the TV.
6 AV4-S when using the S-video socket.
Press the AV button again to
return to TV.
Select the programme you would
like to recall by pressing SWAP
button. Selected programme
number will appear on the upper
left side of the screen. While
watching any programme, you
can recall the selected one by
pressing SWAP button again.
If you press swap button again you
can recall the last programme you
watched. You can cancel SWAP
function by pressing MENU button.
SETUP
MAIN MENU
SWAP PR 01 PR 11 PR 12 SWAP PR 01 PR 13...