ITT 29-100-1 ST - Manual (Page 10)

9
When you are sure the aerial is
connected properly press the OK
button. Autoprogam will start.
AUTOPROGRAM will flash.
Use the Program down button to
select AUTOPROGRAM and
the OK button. A list of
countries will appear. Select
the desired country using
Program and Volume buttons.
press
To cancel Autoprogram whilst it
isworking press the Menu button
it will appear briefly on the screen
repetitively.
Please note:
If auto sort fails to arrange the programmes
in the required sequence please refer to
programme organising.
In the Setup menu select
PROGRAM NO using
the Program down button
and use the Volume up
button to change the Program No
to 01.
Starting with Program 01, tune
in the first channel as follows:
Use the Program down button
to select SEARCH.
Press the Volume up or Volume
down button to start the tuning
search.
When the search finds a strong
channel signal it will stop
searching. The picture will appear.
Use the Program down button to
select PROGRAM NO.
Use the Volume up/down or numeric
buttons to select the desired
programme number.
Use the Program down button to
select STORE. Press theOKbutton
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programmes you want or the
television can receive.
Please note
The system will displayed automatically on
SYSTEM row i.e.BG, L, I, DK depending
the receiving broadcasting system of the
country. In some countries the broadcasting
system can be both in BG/DK or BG/LL´.
Only the TV sets produced with Pal Secam
BG/DK or Pal Secam BG/LL´ systems can
receive both BG/DK or BG/LL´ broadcasts.
In this case the user can select the required
SYSTEM using Volume up/down buttons.
the TV will exit the menu system.
Please note
If you do not press any buttons for 15 seconds
Your TV is now tuned and ready to use.
before the search continues.
As Autoprogram stores a channel
Manual tuning
If you want to tune manually:
SETUP