ILY Enterprise 3 - Manual (Page 6)

Copyright©2005 ILY Enterprise, Inc. All rights reserved. 6
Hardware Connection with Hard Drive for CoolCopyD3
When the system connects with the hard drive, the hard drive must connect on the IDE 0 port
with the “Master” setting and the DVD-ROM must set at “Slave”.
Hardware Connection without Hard Drive for CoolCopyD3
Coolcopy 3
IDE 0 DVD-
Pow er
IDE 3 DVD+/-RW
IDE 2 DVD+/-RW
IDE 1 DVD+/-RW
Coolcopy 3
IDE 3 DVD+/-RW
IDE 2 DVD+/-RW
IDE 1 DVD+/-RW
IDE 0 DVD-ROM
Pow er