ILY Enterprise 3 User Manual

Page 12

If the master disc cannot be read correctly,

the LCD will show the following screen:

4.7 Disc Info

Function 7, Disc Info, shows the basic information of the source DVD.

Select Function 7. Place source DVD into DVD-ROM.

Press the ENT button to show the disc information.

The LCD will show the total sessions and

tracks on the master disc.

Press the ENT button again, the LCD will show

the total time and capacity on the master disc as such:

Press the ENT button again and use the arrow button

to select the session. The LCD will show the

information contained in the session as such:

Press the ENT button again and use the arrow button

to select the track. The LCD will show what

information is contained on the track.

4.8 Select Source

Function 8, Select Source, lets you select the data on the DVD-ROM, DVD writers or HDD as the

source from which you intend to copy.

Select function 8.

Press ENT and then use the arrow button to select

the source.

After selecting the source, press ENT and LCD will

show the following screen:

Note: Suppose you select HDD as the source and try to copy from one of its partitions, but the

partition contains no data. An error message will then appear on your LCD. From here, you can

switch to another partition that contains no data or use function 9 Image to load the data into the

chosen partition first.

4.9 Image

Function 9, Image, is only valid when you have installed a hard drive.

Select function 9. Press ENT.

PreScan Fail!

7. Disc Info

Total 02 Sessions

Total 10 Tracks

Total: 74:00

Total: 650 MB

Session 01

Track 01 - 09

Track 01

AUDIO 03:54

8. Select Source

Src: CD-ROM

01 IDE0 Slave

CD-ROM selected!

9. Image