ILY Enterprise 3 User Manual

Page 26

the data and update its firmware automatically. During updating, do not turn off the power of

machine because the update will not be finished until machine resets itself.

The Update Firmware function updates firmware to the latest version.

2. Unzip the firmware you have and write the file “cdxxx.bin” into the root directory of a blank

DVD-R or DVD-RW disc. You have to close the DVD session. If the same DVD disc still has

capacity to add more data, it can be used to store newer versions of the firmware. When updating

the firmware program from the DVD, only the one from last session will be used. Versions from

previous sessions will be ignored.

Select the source drive to the DVD-ROM first! Then

press the ENT button to enter UpdateFirmware.

The system will search the new firmware from the

DVD and the LCD will show the process as shown here:

When the new firmware is found, press the ENT

button. The system will update it.

4.12.8 Compare Firmware

This function will help you compare the current control firmware version with the updated version

when the firmware disc is placed into the DVD-ROM.

Press the ENT button to enter Compare Firmware.

4.12.9 H/W Diagnostic

This function will detect what devices are connected with the control. The LCD will display the

hardware information.

Press the ENT button to enter H/W Diagnostic.

The LCD will ask the user to do the button test. Following

the LCD instruction, test each function button.

After the button function testing, the system will perform the SDRAM self-test, the hardware

connecting test, and the flash test. Every testing process will be shown on the LCD. It just takes a

few minutes to get the results of hardware diagnostics. It is an easy way to know if the system

works properly.

When testing is finished, the LCD will show the

“Test finished” message. Press the ESC button to

go back to the 12-09 menu.

4.12.10 Load Default

This function will reset any previous settings back to the factory’s default setting. Different

settings will cause duplicator to react differently.

12-07. Adv Setup

Update Firmware

Searching F/W---

XXX/XXXXX

12-08. Adv Setup

Compare Firmware

12-09. Adv Setup

H/W Diagnostic

Enter ESC

Hold ESC to exit

Test finished