Icom COMMUNICATIONS RECEIVER IC-R3 - Manual (Page 9)

5
2
PANEL DESCRIPTION
i
SKIP SCAN INDICATOR (pgs. 22, 24)
➥ “ " ” appears when the selected memory channel is set
as a skip channel in memory mode.
➥ “P " ” shows that the skip frequency function is turned
ON or OFF in VFO mode.
➥ “P " ” appears when the selected memory channel is set
to be skipped during VFO scan (full, band and pro-
grammed scan) in memory mode.
o BATTERY INDICATORS
➥ Both segments appear when the batteries have enough
capacity.
➥ Only the right segment appears when the batteries are
nearing exhaustion.
• “Low V” appears when battery replacement is necessary and
the color LCD is ON.
• The U.S.A. version automatically turns itself OFF when the re-
ceiver detects that battery replacement is necessary.
!0 S (SIGNAL) INDICATORS
Show the relative signal strength while receiving.
!1
BUSY INDICATOR
“RX” appears when receiving a signal or when the squelch
is open.
!2
ATTENUATOR INDICATOR (p. 9)
Appears when the attenuator function is in use.
• Audio and video output jack information
• Video output impedance : 75
Ω
, 1 V p-p typical
• Audio output impedance : 1 k
Ω
, 300 mV rms typical
Audio
Audio
[A/V OUT]
3-conductor
3.5 (d) mm (
1 ⁄ 8 ˝)
connector
Video
Video
Television
Ground
Ground
To [A/V OUT]